LSP-A01(B01) High precision Syringe Pump

LSP-A01(B01) High precision Syringe Pump

Stroke length:150mm

Flow rates:0.0007uL/min-109.136mL/min

Syringe:1

Display:5-inch high-definition touch screen

Control:Touch Panel / External control signal

Linear Force:>160N

Stroke length:150mm
Flow rates:0.0007uL/min-109.136mL/min
Syringe:1
Display:5-inch high-definition touch screen
Control:Touch Panel / External control signal
Linear Force:>160N

  • Product Specifications
  • Help
  • Service Guarantee
  • Related Products
  •  
    Working Mode
    LSP-A01: Injection ; LSP-B01: Infusion / Withdraw
    No. of Syringes
    1
    Reference flow rates
    0.0007 nL/min - 109.14 mL/min
    Syringe Specification
    0.5 uL to 100 mL
    Syringe Selection
    The syringe can be selected in the manufacturer table, or input the inner diameter of the syringe barrel directly.
    Max. Stroke length
    150 mm
    Linear speed
    0.08 um/min - 160 mm/min
    Steping resolution
    0.0625um/ustep
    Precision
    accuracy 1%, Repeat precision 0.05%
    Linear Force
    >160N (The appropriate thrust can be set according to the syringe specification)
    Display
    800*400 5-inch high-definition touch screen
    Parameter settings
    liquid volume, flow rate, injection time, suction time, interval time, injection times can be set and stored
    Power Supply
    AC 90-264V  50Hz/60Hz
    Working environment
    Temperature 0-40 Humidity 20%-80% RH no dewing
    Dimensions
    256mm*190mm*146mm
    IP rating
    IP31
    Speed adustment on line
    Current flow rate is adjustable during operation
    Communication control
    RS485 / USB optional, touch setting address and baud rate
    Status output
    Output start / stop and direction status
    External control start/stop
    External control level signal (5-24v) or contact signal to realize start / stop
    Prompt function
    Real-time display of the Max / Min flow ratedisplay of running parameters dynamically
    Reminder function
    Sound alarm when run to the target liquid volume
    Calibration
    Syringe calibration is available and can store calibration parameters.
    Fast forward / backward
    Infuse or withdraw liquid at full speed


     

    Syringe

    Syringe ID(mm)

    Reference flow rates(nl/min~ml/min)

    0.5ul

    0.103

    0.0007~0.0013

    1ul

    0.146

    0.0013~0.0027

    2ul

    0.206

    0.0027~0.0053

    5ul

    0.343

    0.0074~0.0148

    10ul

    0.485

    0.0148~0.0295

    25ul

    0.729

    0.0334~0.0668

    50ul

    1.03

    0.0667~0.1333

    100ul

    1.457

    0.1334~0.2668

    250ul

    2.304

    0.3335~0.6671

    500ul

    3.256

    0.6658~1.3322

    1ml

    4.73

    1.4060~2.8110

    2ml

    8.92

    4.9990~9.9980

    2.5ml

    8.92

    4.9990~9.9980

    5ml

    12.4

    9.6620~19.3220

    10ml

    14.87

    13.8940~27.7860

    20ml

    19.07

    22.8500~45.6990

    50ml

    28.95

    52.6600~105.3190

    60ml

    29.47

    54.5680~109.1360


     
  •   How to select the type
     

      Issues to be confirmed before type selection:
     

      1. Determine the required flow rate (mL/min) and the number of channels required;

      2. Determine use scenarios; Can be applied directly or used with equipment, supporting control via RS485 or external signals

      3. parameter display; The digital tube only displays the rotational speed; LCD display of flow rate, rotational speed and other calibration parameters; The touchscreen displays flow, rpm, and other programmed or configured parameters

      4. Liquid composition; Influence hose selection, platinum sulfide silica tubing is recommended for conventional fluids, and inlet hose is recommended for corrosive fluids
     

      About drives
     

      Flow - The higher the drive rpm, the greater the flow, selecting the appropriate driver by reference flow

      Control mode - fixed speed; Adjustable speed; Speed adjustable, supporting flow correction (to achieve precise control of flow); Speed adjustable, support flow distribution (quantitative distribution); Multiple forms such as external signal control are available

      Parameter display - digital tube, liquid-crystal display, touchscreen

      Degree of protection - Requirements for the drive to be sealed, dustproof, and waterproof, depending on the environment of use
     

      About Tubing
     

      Platinum Vulcanized Silicon Rubber Tube – suitable for the transport of most conventional fluids

      FWG60/FG60/A-60-F - Food grade, long life

      IG60/A-60-G - Industrial grade, long life

      PG60/pharmed BPT - Medical grade, long life

      Chemical - Resistance to strong corrosive liquids, lined with Teflon coating

      KG60/Viton - Strong corrosive resistant liquid, pure Teflon material


  •   About the lead time
     

      Peristaltic pump, injection pump, miniature piston pump, domestic silicon rubber tube and other series of products, most of which are off the shelf and can be shipped within 48 hours;

      The filling machines, filling systems and other products are usually made to order, with relatively little inventory, a lead time of about 1 – 2 weeks, and a small number of off the shelf items;

      Common models of imported hose series products are in stock; Due to the impact of international logistics on the imported hose, the lead time is about 1~4 weeks in special cases;

      Remark: All peristaltic pump series products require 3 days of non-stop operation and aging before leaving the factory, to ensure a lower failure rate for customers to rest assured of use
     

      About aftermarket
     

      One year warranty (except consumables, improper use or man-made damage not covered by warranty)

      Under special circumstances such as flow differences, service environment, personal reasons due to type selection or actual application, without affecting secondary sales, customer service exchanges may be contacted directly
     

      About Logistics
     

      In China, default Deppong/SF distribution, please communicate with customer service for special requirements and confirm