LSP-D02 Dual channel independent control syringe pump
Stroke length：150mm
Flow rates：0.0007nL-109.14mL/min
Syringe：2
Display：5-inch high-definition touch screen
Control：Touch Panel / External control signal
Linear Force：>160N
- Product Specifications
- Help
- Service Guarantee
- Related Products
-
Working ModeIndependent, Reciprocating, Synchronizing, Synchronous confluenceNo. of Syringes2Reference flow rates0.0007 nL/min - 109.14 mL/minSyringe Specification0.5 uL to 60 mLSyringe SelectionThe syringe can be selected in the manufacturer table, or input the inner diameter of the syringe barrel directly.Max. Stroke length150 mmLinear speed0.08 um/min - 160 mm/minSteping resolution0.0625um/ustepPrecisionaccuracy 1%, Repeat precision 0.05%Linear Force>160N (The appropriate thrust can be set according to the syringe specification)Display800*400 5-inch high-definition touch screenParameter settingsliquid volume, flow rate, injection time, suction time, interval time, injection times can be set and storedPower SupplyAC 96-264V 50Hz/60HzWorking environmentTemperature 0-40℃ Humidity 20%-80% RH no dewingDimensions256mm*218mm*152mmIP ratingIP31Speed adustment on lineCurrent flow rate is adjustable during operationCommunication controlRS485 / USB optional, touch setting address and baud rateStatus outputOutput start / stop and direction statusExternal control start/stopExternal control level signal (5-24v) or contact signal to realize start / stopPrompt functionReal-time display of the Max / Min flow rate；display of running parameters dynamicallyReminder functionSound alarm when run to the target liquid volumeCalibrationSyringe calibration is available and can store calibration parameters.Fast forward / backwardInfuse or withdraw liquid at full speed
Syringe
Syringe ID（mm）
Reference flow rates（nl/min~ml/min）
0.5ul
0.103
0.0007~0.0013
1ul
0.146
0.0013~0.0027
2ul
0.206
0.0027~0.0053
5ul
0.343
0.0074~0.0148
10ul
0.485
0.0148~0.0295
25ul
0.729
0.0334~0.0668
50ul
1.03
0.0667~0.1333
100ul
1.457
0.1334~0.2668
250ul
2.304
0.3335~0.6671
500ul
3.256
0.6658~1.3322
1ml
4.73
1.4060~2.8110
2ml
8.92
4.9990~9.9980
2.5ml
8.92
4.9990~9.9980
5ml
12.4
9.6620~19.3220
10ml
14.87
13.8940~27.7860
20ml
19.07
22.8500~45.6990
50ml
28.95
52.6600~105.3190
60ml
29.47
54.5680~109.1360
-
How to select the type
Issues to be confirmed before type selection:
1. Determine the required flow rate (mL/min) and the number of channels required;
2. Determine use scenarios; Can be applied directly or used with equipment, supporting control via RS485 or external signals
3. parameter display; The digital tube only displays the rotational speed; LCD display of flow rate, rotational speed and other calibration parameters; The touchscreen displays flow, rpm, and other programmed or configured parameters
4. Liquid composition; Influence hose selection, platinum sulfide silica tubing is recommended for conventional fluids, and inlet hose is recommended for corrosive fluids
About drives
Flow - The higher the drive rpm, the greater the flow, selecting the appropriate driver by reference flow
Control mode - fixed speed; Adjustable speed; Speed adjustable, supporting flow correction (to achieve precise control of flow); Speed adjustable, support flow distribution (quantitative distribution); Multiple forms such as external signal control are available
Parameter display - digital tube, liquid-crystal display, touchscreen
Degree of protection - Requirements for the drive to be sealed, dustproof, and waterproof, depending on the environment of use
About Tubing
Platinum Vulcanized Silicon Rubber Tube – suitable for the transport of most conventional fluids
FWG60/FG60/A-60-F - Food grade, long life
IG60/A-60-G - Industrial grade, long life
PG60/pharmed BPT - Medical grade, long life
Chemical - Resistance to strong corrosive liquids, lined with Teflon coating
KG60/Viton - Strong corrosive resistant liquid, pure Teflon material
-
About the lead time
Peristaltic pump, injection pump, miniature piston pump, domestic silicon rubber tube and other series of products, most of which are off the shelf and can be shipped within 48 hours;
The filling machines, filling systems and other products are usually made to order, with relatively little inventory, a lead time of about 1 – 2 weeks, and a small number of off the shelf items;
Common models of imported hose series products are in stock; Due to the impact of international logistics on the imported hose, the lead time is about 1~4 weeks in special cases;
Remark: All peristaltic pump series products require 3 days of non-stop operation and aging before leaving the factory, to ensure a lower failure rate for customers to rest assured of use
About aftermarket
One year warranty (except consumables, improper use or man-made damage not covered by warranty)
Under special circumstances such as flow differences, service environment, personal reasons due to type selection or actual application, without affecting secondary sales, customer service exchanges may be contacted directly
About Logistics
In China, default Deppong/SF distribution, please communicate with customer service for special requirements and confirm
-
LSP-B01U Ultra-precision syringe pump
Working Mode Infusion / Withdraw No. of Syringes 1
LSP-A04(B04) Four channels syringe pump
Working Mode LSP-A04: Injection ; LSP-B04: Infusion / Withdraw
LSP-A02(B02) Dual Channels Syringe Pump
Working Mode LSP-A02: Injection ; LSP-B02: Infusion / Withdraw
LSP-A01(B01) High precision Syringe Pump
Working Mode LSP-A01: Injection ; LSP-B01: Infusion / Withdraw
