MSP60 IVD auto sampling Industrial Syringe Pump

MSP60 IVD auto sampling Industrial Syringe Pump

Stroke length:60mm

Flow rates:0.0025mL/min~1250mL/min

Syringe:1

Display:-

Control:RS485/RS232/CAN

Linear Force:≥68N

Stroke length:60mm
Flow rates:0.0025mL/min~1250mL/min
Syringe:1
Display:-
Control:RS485/RS232/CAN
Linear Force:≥68N

  • Product Specifications
  • Help
  • Service Guarantee
  • Related Products
  •  
    Technical Specifications
    Accuracy error≤±1%(Rated stroke)
    Precision repeat error≤±0.5%(Rated stroke)
    Wetted material Ceramics, borosilicate glass
    Dimension (L x W x H) 114mm*65mm*254mm
    Power supply DC 24V1.5A (peak)
    Syringe and Drive
    Syringe fitting 1/4-28 thread
    Syringe 50uL, 100uL, 250uL, 500uL, 1mL, 2.5mL, 5mL, 10mL, 25mL
    control resolution 0.01mm / 1 step
    Travel 60mm/6000 steps 
    Time for full stroke 0.025mm/s-50mm/s
    Drive system Ball screw drive
    Valve & Valve Drive
    Turn Time 250ms between adjacent ports
    Valve options 3-port distribution valve (Ceramic / PCTFE)
    Max pressure 0.5MPA
    Fitting 1/4-28 thread
    Piston driving force 68N
    Secondary driving force of piston 34N
    Communication
    Signal input 2-channel TTL level signal input, used to control restart after pause command
    Signal output 3-channel TTL level signal output, used to indicate the working status
    Interface RS485 / 232, Automatic recognition
    Baud rate 9600bps or 38400bps
    Communication address 4-digit BCD dip switch, set 15 communication addresses
    Environmental
    Operating temperature Recommended: 15-40 use low temperature syringe for low temperature application
    Operating Humidity <80% RH, no condensation
    Storage temperature  -20-65
    Storage Humidity <80% RH, no condensation

     



  •   How to select the type
     

      Issues to be confirmed before type selection:
     

      1. Determine the required flow rate (mL/min) and the number of channels required;

      2. Determine use scenarios; Can be applied directly or used with equipment, supporting control via RS485 or external signals

      3. parameter display; The digital tube only displays the rotational speed; LCD display of flow rate, rotational speed and other calibration parameters; The touchscreen displays flow, rpm, and other programmed or configured parameters

      4. Liquid composition; Influence hose selection, platinum sulfide silica tubing is recommended for conventional fluids, and inlet hose is recommended for corrosive fluids
     

      About drives
     

      Flow - The higher the drive rpm, the greater the flow, selecting the appropriate driver by reference flow

      Control mode - fixed speed; Adjustable speed; Speed adjustable, supporting flow correction (to achieve precise control of flow); Speed adjustable, support flow distribution (quantitative distribution); Multiple forms such as external signal control are available

      Parameter display - digital tube, liquid-crystal display, touchscreen

      Degree of protection - Requirements for the drive to be sealed, dustproof, and waterproof, depending on the environment of use
     

      About Tubing
     

      Platinum Vulcanized Silicon Rubber Tube – suitable for the transport of most conventional fluids

      FWG60/FG60/A-60-F - Food grade, long life

      IG60/A-60-G - Industrial grade, long life

      PG60/pharmed BPT - Medical grade, long life

      Chemical - Resistance to strong corrosive liquids, lined with Teflon coating

      KG60/Viton - Strong corrosive resistant liquid, pure Teflon material


  •   About the lead time
     

      Peristaltic pump, injection pump, miniature piston pump, domestic silicon rubber tube and other series of products, most of which are off the shelf and can be shipped within 48 hours;

      The filling machines, filling systems and other products are usually made to order, with relatively little inventory, a lead time of about 1 – 2 weeks, and a small number of off the shelf items;

      Common models of imported hose series products are in stock; Due to the impact of international logistics on the imported hose, the lead time is about 1~4 weeks in special cases;

      Remark: All peristaltic pump series products require 3 days of non-stop operation and aging before leaving the factory, to ensure a lower failure rate for customers to rest assured of use
     

      About aftermarket
     

      One year warranty (except consumables, improper use or man-made damage not covered by warranty)

      Under special circumstances such as flow differences, service environment, personal reasons due to type selection or actual application, without affecting secondary sales, customer service exchanges may be contacted directly
     

      About Logistics
     

      In China, default Deppong/SF distribution, please communicate with customer service for special requirements and confirm