LabMate4 Four-channel independent control peristaltic pump
Speed：0.01-150rpm
Flow rate：0.0013～48ml/min
Max. Number of Channels：4
Display：5-inch high-definition touch screen
Control：Touch Panel / External control signal
Motor：Stepper motor
- Product Specifications
- Help
- Service Guarantee
- Related Products
-
Number of Channels : 4Speed : 0.01-150 rpm,reversible
Speed resolution : 0.01 rpm
Max. Flow rate per channel : 48 mL/min
Pump heads : DG-4(10 roller)
Cassette material : POM and PVDF for for option
Roller material : PET and nylon+molybdenum disulfide for option
Tubing : ID≤3.17mm; Wall Thickness 0.76-1mm
Filling volume : 0.1uL-99999.999L
Timing range : 0.1s~999.9hr
Filling cycle : 0 to 65535, 0 means unlimited cycle
Back suction angle : 0-65535°
Display : 5-inch high-definition touch screen
Work mode : Flow rate Mode, Volume / Time Mode, Volume / Rate Mode, Time / Rate Mode
Control mode : Touch screen control, external control, communication control
Communication interface : RS485 / USB
Ex-control on/off : External level signals(5-24v) or contacts signals to control start/stop of each channel
Status output : Each channel independently output status of start/stop and direction
Power supply : AC 90-264V 50/60 Hz
Operating temperature : Temperature 0 to 40 ℃
Relative humidity : 20%-80% RH non-condensing
Dimensions : 252.5mm*126mm*165mm
IP rating : IP31
Indenpendent channel : Each channel is completely independent，can select different mode,tubing and set volume,speed,time etc seperately
Channel off : Any channel can be disabled through the interface, and this channel can not be set and configured after being disabled
Calibration function : Each-channel can be calibrated independently.and the caligration paramenter are stored seperately.
Online adjustment : Speed and flow rate can be adjusted during work
Prompt function : Real-time display of the maximum flow and speed available for different size of tubing. Dynamicly display the parameters of each channel
Tubing
0.5*0.8
1*1
2*1
3*1
Flow rate
0.0013~2mL/min
0.006~9mL/min
0.022~33mL/min
0.032~48mL/min
-
How to select the type
Issues to be confirmed before type selection:
1. Determine the required flow rate (mL/min) and the number of channels required;
2. Determine use scenarios; Can be applied directly or used with equipment, supporting control via RS485 or external signals
3. parameter display; The digital tube only displays the rotational speed; LCD display of flow rate, rotational speed and other calibration parameters; The touchscreen displays flow, rpm, and other programmed or configured parameters
4. Liquid composition; Influence hose selection, platinum sulfide silica tubing is recommended for conventional fluids, and inlet hose is recommended for corrosive fluids
About drives
Flow - The higher the drive rpm, the greater the flow, selecting the appropriate driver by reference flow
Control mode - fixed speed; Adjustable speed; Speed adjustable, supporting flow correction (to achieve precise control of flow); Speed adjustable, support flow distribution (quantitative distribution); Multiple forms such as external signal control are available
Parameter display - digital tube, liquid-crystal display, touchscreen
Degree of protection - Requirements for the drive to be sealed, dustproof, and waterproof, depending on the environment of use
About Tubing
Platinum Vulcanized Silicon Rubber Tube – suitable for the transport of most conventional fluids
FWG60/FG60/A-60-F - Food grade, long life
IG60/A-60-G - Industrial grade, long life
PG60/pharmed BPT - Medical grade, long life
Chemical - Resistance to strong corrosive liquids, lined with Teflon coating
KG60/Viton - Strong corrosive resistant liquid, pure Teflon material
-
About the lead time
Peristaltic pump, injection pump, miniature piston pump, domestic silicon rubber tube and other series of products, most of which are off the shelf and can be shipped within 48 hours;
The filling machines, filling systems and other products are usually made to order, with relatively little inventory, a lead time of about 1 – 2 weeks, and a small number of off the shelf items;
Common models of imported hose series products are in stock; Due to the impact of international logistics on the imported hose, the lead time is about 1~4 weeks in special cases;
Remark: All peristaltic pump series products require 3 days of non-stop operation and aging before leaving the factory, to ensure a lower failure rate for customers to rest assured of use
About aftermarket
One year warranty (except consumables, improper use or man-made damage not covered by warranty)
Under special circumstances such as flow differences, service environment, personal reasons due to type selection or actual application, without affecting secondary sales, customer service exchanges may be contacted directly
About Logistics
In China, default Deppong/SF distribution, please communicate with customer service for special requirements and confirm
