WT-600U Reinforced peristaltic pump, IP65
Speed：1-600rpm
Flow rate：13-12000mL/min
Max. Number of Channels：8
Display：3-digit broken code LCD
Control：Keypad control / External control signal
Motor：Brushless Motor
- Product Specifications
- Help
- Service Guarantee
- Related Products
-
Speed : 1-600 rpm,reversibleSpeed resolution : 1rpm
Control mode : Keypad control, external control input control, RS485 communication control (Modbus)
Applicable pump heads : YZ1513、YZ2513、BZ、DMD1513
Flow rates : 13-12000 mL/min
Display : 3-digit broken code LCD, displaying running speed
External control : 0-5V, 0-10V, 4-20mA, 0-10K
RS485 / USB : Can set address and display on screen，Baud rate:1200-9600 bps
Status output : Start-stop, direction, alarm
Power supply : AC 100-240V 50/60Hz
Power consumption : < 20W
Operating temperature : Temperature 0 to 40 ℃
Relative humidity : < 80%
Dimensions : 283mm*206mm*262mm
IP rating : IP65
Keypad lock function : Keypad can be locked to prevent the misoperation
Leakage detection : After discovering the leakage, act according to the customer's strategy (need to add a detection module)
Upper limit of the speed : The max speed can be set through the keypad, and after setting, the speed of the pump is limited to this speed
Pump head-open-pump-stop : To make sure safty ,the pump stop after pump head open. (optional)
WT-600U
Pump Head
Number of Channels
Tubing
Flow rate (mL/min)
YZ35
1/2
73#、82#
13~12000
KZ25
1/2/3/4
15#、24#、35#、36#
3~6000
YZ1513
1~8
13#、14#、19#、16#、25#、17#、18#
0.063~2200
YZ2513S
1~8
15#、24#
1.6~1600
-
How to select the type
Issues to be confirmed before type selection:
1. Determine the required flow rate (mL/min) and the number of channels required;
2. Determine use scenarios; Can be applied directly or used with equipment, supporting control via RS485 or external signals
3. parameter display; The digital tube only displays the rotational speed; LCD display of flow rate, rotational speed and other calibration parameters; The touchscreen displays flow, rpm, and other programmed or configured parameters
4. Liquid composition; Influence hose selection, platinum sulfide silica tubing is recommended for conventional fluids, and inlet hose is recommended for corrosive fluids
About drives
Flow - The higher the drive rpm, the greater the flow, selecting the appropriate driver by reference flow
Control mode - fixed speed; Adjustable speed; Speed adjustable, supporting flow correction (to achieve precise control of flow); Speed adjustable, support flow distribution (quantitative distribution); Multiple forms such as external signal control are available
Parameter display - digital tube, liquid-crystal display, touchscreen
Degree of protection - Requirements for the drive to be sealed, dustproof, and waterproof, depending on the environment of use
About Tubing
Platinum Vulcanized Silicon Rubber Tube – suitable for the transport of most conventional fluids
FWG60/FG60/A-60-F - Food grade, long life
IG60/A-60-G - Industrial grade, long life
PG60/pharmed BPT - Medical grade, long life
Chemical - Resistance to strong corrosive liquids, lined with Teflon coating
KG60/Viton - Strong corrosive resistant liquid, pure Teflon material
-
About the lead time
Peristaltic pump, injection pump, miniature piston pump, domestic silicon rubber tube and other series of products, most of which are off the shelf and can be shipped within 48 hours;
The filling machines, filling systems and other products are usually made to order, with relatively little inventory, a lead time of about 1 – 2 weeks, and a small number of off the shelf items;
Common models of imported hose series products are in stock; Due to the impact of international logistics on the imported hose, the lead time is about 1~4 weeks in special cases;
Remark: All peristaltic pump series products require 3 days of non-stop operation and aging before leaving the factory, to ensure a lower failure rate for customers to rest assured of use
About aftermarket
One year warranty (except consumables, improper use or man-made damage not covered by warranty)
Under special circumstances such as flow differences, service environment, personal reasons due to type selection or actual application, without affecting secondary sales, customer service exchanges may be contacted directly
About Logistics
In China, default Deppong/SF distribution, please communicate with customer service for special requirements and confirm
-
WT600D High-flow constant-feed peristaltic pump
Speed : 0.1-600 rpm,reversibleSpeed resolution : 0.1rpm(<100rpm), 1rpm(≥100rpm)Applic
BT-600DP Waterproof dosing peristaltic pump, IP65
Speed : 0.1-600 rpm,reversibleSpeed resolution : 0.1rpm(<100rpm), 1rpm(≥100rpm) in Ti
BT-300BP Water proof peristaltic pump, IP65
Speed : 0.1-400 rpm,reversibleSpeed resolution : 0.1-99.9/0.1rpm, 100~400rpm/1rpmControl
