BT-600D Peristaltic filling pump, Quantitative distribution pump
Speed：0.01-600rpm
Flow rate：0.0063-3300ml/min
Max. Number of Channels：2
Display：3.5-inch high-definition touch screen
Control：Touch Panel / External control signal
Motor：Stepper motor
- Product Specifications
- Help
- Service Guarantee
- Related Products
-
Speed : 0.1-600 rpm,reversibleSpeed resolution : 0.1rpm(<100rpm), 1rpm(≥100rpm) in Timing and Fixed speed mode;0.01 in Filling mode
Applicable pump heads : YZ1513、YZ2513、BZ、DMD1513
Flow rates : 0.0063-3300 mL/min
Filling volume : 0.1uL-99999.999L
Filling time : 0-6553.5s
Filling cycle : 0 to 65535, 0 means unlimited cycle
Timing range : 0.1s-6553.5hr
Back suction angle : 0-999°; Delay: 0-100s
Display : High-definition touch screen
Working mode : 7 working modes are optional
Control mode : Touch screen control, external control input control, RS485 communication control (Modbus)
External control : External control signal (5-24V) to realize start and stop control
RS485 communication : Address can be set and screen display, baud rate 1200-9600 bps
Status output : Start-stop, direction, alarm
Power supply : AC 100-240V 50/60Hz
Operating temperature : Temperature 0 to 40 ℃
Relative humidity : 20%-85% RH non-condensing
Dimensions : 248mm*170mm*164mm
Weight : 2.8 Kg
IP rating : IP31
Flow rate calibration : A variety of flow calibration methods
Online adjustment : Adjust the flow rate during operation
Pause function : You can pause during the transfer
Prompt function : According to the setting parameters, the set flow range is displayed
Leakage detection : Indicator light and audible alarm after leakage (optional)
Density parameters : Flow rate can be set in weight units
BT-600D
Pump Head
Number of Channels
Tubing
Flow rate (mL/min)
YZ1513
1/2
13# 14# 19# 16# 25# 17# 18#
0.0063~2200
YZ2513S
1/2
15# 24#
0.16~1600
DMD1513
2-in-1
13# 14# 19# 16# 25# 17#
0.012~3300
BZ
1/2
14# 16# 24#
0.025~1600
-
How to select the type
Issues to be confirmed before type selection:
1. Determine the required flow rate (mL/min) and the number of channels required;
2. Determine use scenarios; Can be applied directly or used with equipment, supporting control via RS485 or external signals
3. parameter display; The digital tube only displays the rotational speed; LCD display of flow rate, rotational speed and other calibration parameters; The touchscreen displays flow, rpm, and other programmed or configured parameters
4. Liquid composition; Influence hose selection, platinum sulfide silica tubing is recommended for conventional fluids, and inlet hose is recommended for corrosive fluids
About drives
Flow - The higher the drive rpm, the greater the flow, selecting the appropriate driver by reference flow
Control mode - fixed speed; Adjustable speed; Speed adjustable, supporting flow correction (to achieve precise control of flow); Speed adjustable, support flow distribution (quantitative distribution); Multiple forms such as external signal control are available
Parameter display - digital tube, liquid-crystal display, touchscreen
Degree of protection - Requirements for the drive to be sealed, dustproof, and waterproof, depending on the environment of use
About Tubing
Platinum Vulcanized Silicon Rubber Tube – suitable for the transport of most conventional fluids
FWG60/FG60/A-60-F - Food grade, long life
IG60/A-60-G - Industrial grade, long life
PG60/pharmed BPT - Medical grade, long life
Chemical - Resistance to strong corrosive liquids, lined with Teflon coating
KG60/Viton - Strong corrosive resistant liquid, pure Teflon material
-
About the lead time
Peristaltic pump, injection pump, miniature piston pump, domestic silicon rubber tube and other series of products, most of which are off the shelf and can be shipped within 48 hours;
The filling machines, filling systems and other products are usually made to order, with relatively little inventory, a lead time of about 1 – 2 weeks, and a small number of off the shelf items;
Common models of imported hose series products are in stock; Due to the impact of international logistics on the imported hose, the lead time is about 1~4 weeks in special cases;
Remark: All peristaltic pump series products require 3 days of non-stop operation and aging before leaving the factory, to ensure a lower failure rate for customers to rest assured of use
About aftermarket
One year warranty (except consumables, improper use or man-made damage not covered by warranty)
Under special circumstances such as flow differences, service environment, personal reasons due to type selection or actual application, without affecting secondary sales, customer service exchanges may be contacted directly
About Logistics
In China, default Deppong/SF distribution, please communicate with customer service for special requirements and confirm
-
BT-600DS Stainless steel peristaltic pump
Speed : 0.1-600 rpm,reversibleSpeed resolution : 0.1rpm(<100rpm), 1rpm(≥100rpm) in Ti
BT-601D Multi-head serial peristaltic pump
Speed : 0.1-600 rpm,reversibleSpeed resolution : 0.1rpm(<100rpm), 1rpm(≥100rpm) in Ti
BT-300D Lab Metering Peristaltic Pump
Speed : 0.1-400 rpm,reversibleSpeed resolution : 0.1rpm(<100rpm), 1rpm(≥100rpm) in Ti
BT-100D High-precision metering peristaltic pump
Speed : 0.1-150 rpm,reversibleSpeed resolution : 0.1rpm(<100rpm), 1rpm(≥100rpm) in Ti
