OEM-STB01 Stepper motor driven peristaltic pump
Speed：1-600rpm
Flow rate：0.37-2200mL/min
Max. Number of Channels：4
Display：None
Control：Controlled by user
Motor：Stepper motor
- Product Specifications
- Help
- Service Guarantee
- Related Products
-
The small size and simple structure peristaltic pump driver composed of 57 stepper motor and mounting bracket can be matched with a variety of pump heads to achieve fluid transmission below 2200mL/min.The user directly drives the stepper motor to control the working process and adopts the baseplate installation method.
STB01
Pump Head
Number of Channels
Tubing
Flow rate (mL/min)
DG
1/2/3/4
ID≤3.17mm; Wall Thickness 0.8-1mm
≤70
1
13# 14# 19# 16# 25# 17# 18#
≤2200
1
15# 24#
≤1600
BZ
1
14# 16# 24#
≤1630
-
How to select the type
Issues to be confirmed before type selection:
1. Determine the required flow rate (mL/min) and the number of channels required;
2. Determine use scenarios; Can be applied directly or used with equipment, supporting control via RS485 or external signals
3. parameter display; The digital tube only displays the rotational speed; LCD display of flow rate, rotational speed and other calibration parameters; The touchscreen displays flow, rpm, and other programmed or configured parameters
4. Liquid composition; Influence hose selection, platinum sulfide silica tubing is recommended for conventional fluids, and inlet hose is recommended for corrosive fluids
About drives
Flow - The higher the drive rpm, the greater the flow, selecting the appropriate driver by reference flow
Control mode - fixed speed; Adjustable speed; Speed adjustable, supporting flow correction (to achieve precise control of flow); Speed adjustable, support flow distribution (quantitative distribution); Multiple forms such as external signal control are available
Parameter display - digital tube, liquid-crystal display, touchscreen
Degree of protection - Requirements for the drive to be sealed, dustproof, and waterproof, depending on the environment of use
About Tubing
Platinum Vulcanized Silicon Rubber Tube – suitable for the transport of most conventional fluids
FWG60/FG60/A-60-F - Food grade, long life
IG60/A-60-G - Industrial grade, long life
PG60/pharmed BPT - Medical grade, long life
Chemical - Resistance to strong corrosive liquids, lined with Teflon coating
KG60/Viton - Strong corrosive resistant liquid, pure Teflon material
-
About the lead time
Peristaltic pump, injection pump, miniature piston pump, domestic silicon rubber tube and other series of products, most of which are off the shelf and can be shipped within 48 hours;
The filling machines, filling systems and other products are usually made to order, with relatively little inventory, a lead time of about 1 – 2 weeks, and a small number of off the shelf items;
Common models of imported hose series products are in stock; Due to the impact of international logistics on the imported hose, the lead time is about 1~4 weeks in special cases;
Remark: All peristaltic pump series products require 3 days of non-stop operation and aging before leaving the factory, to ensure a lower failure rate for customers to rest assured of use
About aftermarket
One year warranty (except consumables, improper use or man-made damage not covered by warranty)
Under special circumstances such as flow differences, service environment, personal reasons due to type selection or actual application, without affecting secondary sales, customer service exchanges may be contacted directly
About Logistics
In China, default Deppong/SF distribution, please communicate with customer service for special requirements and confirm
-
OEM-YG1212 Cap-pressing peristaltic pump
The 12-channel integrated pressure block ,replace tubing easily and adjust flow convenie
OEM-STB03A-WX10 Speed-adjust peristaltic pump
Use WX10 pump headMainly designed for OEM applicationsMulti-control modes are availableS
OEM-LP412 Muilti-channel low pulsation Peristaltic pump
Low pulsation, to ensure the stability of the dosing, small error resistance, acid and a
OEM-SLP412 Peristaltic pump, Used in analysis and testing instruments
Low pulsation, to ensure the stability of the dosing, small error resistance, acid and a
