SP75-1030 Ten channel syringe pump filling system
Speed：75mm
Flow rate：23.1uL/s~9.25mL/s
Max. Number of Channels：10
Display：-
Control：RS485/RS232
Motor：≥500N
- Product Specifications
- Help
- Service Guarantee
- Related Products
-
Pipeling line interface：Luer connectorTransmission mechanism：Ball screw
Signal input：2-channel TTL level signal input, used to control the restart after the pause command
Signal output：3-channel TTL level signal output, used to indicate the working status
communication interface：RS485/USB Two communication interfaces, automatic identification
Communication rate：9600bps/38400bps Configure via communication command
Communication address setting：Set 15 communication addresses on the 4-bit BCD dial switch
Micro step mode：can work under micro step mode，it adopt 8 subdivision or 16 subdivision techniques.48000 micro steps for full stroke
Programme ability：slope/terminate speed/speed of piston/compensation of gap can be programmed. can store commane string,delay and recycle,Termination of the movement
1、Suitable syringe：30ml, maximium medical disposable syringe :28.5ml
2、Rated stroke：75mm/3000 steps or 48000 steps
5、Linear speed range：0.025mm/s-50mm/s
4、 Range of flow rate ：23.1ul/s~9.25ml/s
5、Precision of flow rate：error≤±1%(rated stroke)
6、Precision of volume：repeatable errors≤±1%(rated stroke)
7、Time range of rated stroke：3s-1200s
2、Precision：error≤±1%(Rated stroke)
3、Volume accuracy：repeat error≤±0.5%(Rated stroke)
4、Rated stroke：60mm/6000 strokes
8、Control resolution：0.025mm/1step or 1.56um/1step
9、Piston drive force,Max：≥500N
10、Referential value of bearable pressure of pipeline ,Max：0.2Mpa
11、Weight：5.92Kg
12、Power supply: DC24V/5A
13、Working enviroment：Temperature:15℃-40℃
14、Humidity：<80%
15、Measurement(L*W*H)：508x245x130(mm)
-
How to select the type
Issues to be confirmed before type selection:
1. Determine the required flow rate (mL/min) and the number of channels required;
2. Determine use scenarios; Can be applied directly or used with equipment, supporting control via RS485 or external signals
3. parameter display; The digital tube only displays the rotational speed; LCD display of flow rate, rotational speed and other calibration parameters; The touchscreen displays flow, rpm, and other programmed or configured parameters
4. Liquid composition; Influence hose selection, platinum sulfide silica tubing is recommended for conventional fluids, and inlet hose is recommended for corrosive fluids
About drives
Flow - The higher the drive rpm, the greater the flow, selecting the appropriate driver by reference flow
Control mode - fixed speed; Adjustable speed; Speed adjustable, supporting flow correction (to achieve precise control of flow); Speed adjustable, support flow distribution (quantitative distribution); Multiple forms such as external signal control are available
Parameter display - digital tube, liquid-crystal display, touchscreen
Degree of protection - Requirements for the drive to be sealed, dustproof, and waterproof, depending on the environment of use
About Tubing
Platinum Vulcanized Silicon Rubber Tube – suitable for the transport of most conventional fluids
FWG60/FG60/A-60-F - Food grade, long life
IG60/A-60-G - Industrial grade, long life
PG60/pharmed BPT - Medical grade, long life
Chemical - Resistance to strong corrosive liquids, lined with Teflon coating
KG60/Viton - Strong corrosive resistant liquid, pure Teflon material
-
About the lead time
Peristaltic pump, injection pump, miniature piston pump, domestic silicon rubber tube and other series of products, most of which are off the shelf and can be shipped within 48 hours;
The filling machines, filling systems and other products are usually made to order, with relatively little inventory, a lead time of about 1 – 2 weeks, and a small number of off the shelf items;
Common models of imported hose series products are in stock; Due to the impact of international logistics on the imported hose, the lead time is about 1~4 weeks in special cases;
Remark: All peristaltic pump series products require 3 days of non-stop operation and aging before leaving the factory, to ensure a lower failure rate for customers to rest assured of use
About aftermarket
One year warranty (except consumables, improper use or man-made damage not covered by warranty)
Under special circumstances such as flow differences, service environment, personal reasons due to type selection or actual application, without affecting secondary sales, customer service exchanges may be contacted directly
About Logistics
In China, default Deppong/SF distribution, please communicate with customer service for special requirements and confirm
-
