FSU Series Split Peristaltic Pump Filling System
Speed：-
Flow rate：0.1-100 mL/Bottle
Max. Number of Channels：2 / Customized
Display：7-inch high-definition touch screen
Control：Controller / External control signal
Motor：Stepper motor
- Product Specifications
- Help
- Service Guarantee
- Related Products
-
Structural & Layout FSU-02AS 2 The display screen is on the right side, parallel horizontally 603*188*180 0.1ml/bottle~100ml/bottle FSU-02ASTD 2 Display screen on top, filling head on bottom, horizontally parallel 295*188*360 FSU-03AS 3 The display screen is on the right side, parallel horizontally 709*188*180 FSU-04AS 4 The display screen is on the right side, parallel horizontally 865*188*180 FSU-04ASTD 4 The display screen is on top, the filling head is on the bottom, and the two rows are parallel 295*520*180 FSU-05AS 5 The display screen is on the right side, parallel horizontally 1021*188*180 *The above table lists the standing integrated filling system, which can be customized for products beyond the list.
7-inch touch screen human-machine interface , Chinese and English can be switched, information is intuitive, and operation is convenient;
High quality stepping motor drive, stable and efficient operating system and pipeline to ensure the filling accuracy;
The optimized calibration algorithm has been used by the client for a long time, which is more convenient to use;
The speed can be adjusted online to facilitate the user to adjust the flow change caused by hose aging;
Operation mode of controller: touch screen control, upper computer communication control
Filling operation control mode: offline control (touch screen control), online control (external signal control filling start and stop in case of no bottle)
External start signal input: each filling system has a pair of contact signal input, which controls the start of filling in online mode
Filling operation control mode: offline control (touch screen control), online control (external signal control filling start and stop in case of no bottle)
Stainless steel shell, corrosion resistant, easy to clean;
It can control the start/stop and left/right turn of each channel of the executive unit.
It can control single or multiple channels to empty and recover at the same time.
The back suction angle and time can be set, and all channels can back suction at the same time.
Provide password function: protect the system parameters set by users to prevent misoperation.
Provide the function of saving and calling for the filling scheme.
The external communication interface adopts RS485 bus, baud rate and parity check can be set, and communication protocol adopts Modbus standard protocol.
The communication address of each channel can be set by the membrane button and displayed by LED
Pump
HeadFilling volume
(ml)Tubing Precision ID of filling nozzle
(mm)Production
(pcs/min)DG0110 0.1-0.3 1*1 ≤±2% ≤0.5 27-30 YZ1513
FG15-130.3-0.5 13# ≤0.5 1.0-2.3 14# ≤1.0 2.6-5.1 19# ≤1.5 4.6-9.1 16# ≤2.0 10-19 25# ≤3.0 15-30 17# ≤3.0 YZ2513S 8.0-17 15# ≤3.0 12-24 24# ≤3.0 DMD15-13 0.1-0.9 2*13# ≤0.5 0.2-2.3 2*14# ≤1.0 0.5-5.9 2*19# ≤2.0 2.0-1.0 2*16# ≤3.0 5.0-25 2*25# ≤3.0 10.0-50 2*17# ≤4.0
-
How to select the type
Issues to be confirmed before type selection:
1. Determine the required flow rate (mL/min) and the number of channels required;
2. Determine use scenarios; Can be applied directly or used with equipment, supporting control via RS485 or external signals
3. parameter display; The digital tube only displays the rotational speed; LCD display of flow rate, rotational speed and other calibration parameters; The touchscreen displays flow, rpm, and other programmed or configured parameters
4. Liquid composition; Influence hose selection, platinum sulfide silica tubing is recommended for conventional fluids, and inlet hose is recommended for corrosive fluids
About drives
Flow - The higher the drive rpm, the greater the flow, selecting the appropriate driver by reference flow
Control mode - fixed speed; Adjustable speed; Speed adjustable, supporting flow correction (to achieve precise control of flow); Speed adjustable, support flow distribution (quantitative distribution); Multiple forms such as external signal control are available
Parameter display - digital tube, liquid-crystal display, touchscreen
Degree of protection - Requirements for the drive to be sealed, dustproof, and waterproof, depending on the environment of use
About Tubing
Platinum Vulcanized Silicon Rubber Tube – suitable for the transport of most conventional fluids
FWG60/FG60/A-60-F - Food grade, long life
IG60/A-60-G - Industrial grade, long life
PG60/pharmed BPT - Medical grade, long life
Chemical - Resistance to strong corrosive liquids, lined with Teflon coating
KG60/Viton - Strong corrosive resistant liquid, pure Teflon material
-
About the lead time
Peristaltic pump, injection pump, miniature piston pump, domestic silicon rubber tube and other series of products, most of which are off the shelf and can be shipped within 48 hours;
The filling machines, filling systems and other products are usually made to order, with relatively little inventory, a lead time of about 1 – 2 weeks, and a small number of off the shelf items;
Common models of imported hose series products are in stock; Due to the impact of international logistics on the imported hose, the lead time is about 1~4 weeks in special cases;
Remark: All peristaltic pump series products require 3 days of non-stop operation and aging before leaving the factory, to ensure a lower failure rate for customers to rest assured of use
About aftermarket
One year warranty (except consumables, improper use or man-made damage not covered by warranty)
Under special circumstances such as flow differences, service environment, personal reasons due to type selection or actual application, without affecting secondary sales, customer service exchanges may be contacted directly
About Logistics
In China, default Deppong/SF distribution, please communicate with customer service for special requirements and confirm
-
